How to check zoning in Western Australia

Type the address below. You get the zone, the overlays and the lot in a few seconds, free, with no account.

The steps

  1. Type the street address

    Enter the number, street and suburb in the box above. It is free and needs no account.

  2. Read the zone

    The zone is at the top of the result, with the planning scheme it comes from. On a lot that sits across two zones, both are shown with the share of the lot each covers.

  3. Read the overlays

    Each overlay says one of three things: it affects the lot, it does not, or it was not checked. “Not checked” means no map was available to ask, which is different from a clear answer.

  4. See what the zone allows

    The zone’s land use table lists what needs no approval, what needs approval and what is prohibited. The result shows it where ZoneScout holds it.

  5. Confirm before you spend money

    A map result is a guide. Before you buy or build, confirm the zone and overlays with the council, or ask it for the formal planning certificate or written advice it issues for a property.

What the result shows in Western Australia

  • The zone from the local planning scheme.
  • The residential density code (R20 or R40, for example), which sets the site area each dwelling needs.
  • Bushfire prone areas.
  • Lot size, street frontage and slope.

Prefer a map?

The Western Australia zoning map shows every lot coloured by zone, council by council. Click a lot to see its zone, size and overlays. The map is a dated copy; the address search asks the government’s data at the time you search.

The official source

The Planning and Development Act 2005 sets up the system. Each local government's planning scheme zones the land and gives residential areas a density code such as R20 or R40, and the R-Codes set lot sizes, setbacks and open space for each code. Subdivision is approved by the Western Australian Planning Commission. Building permits are issued under the Building Act 2011.

The government’s own map is PlanWA ↗. Planning information for the state is at WA Planning ↗.

Frequently asked questions

Is it free to check zoning in Western Australia?

Yes. ZoneScout’s address search is free and needs no account. The government’s own planning map is free too.

Is the zone ZoneScout shows the official one?

It is read from the government’s published planning data. The formal record is the planning scheme itself and the certificate the council issues for a property, so confirm with the council before relying on it.

Can I check zoning without an address?

Yes. Open the Western Australia zoning map and click any lot to see its zone.

What do I do after I know the zone?

Look at what the zone allows, then at the rules for your project. In Western Australia, your local government's planning scheme sets the zone and its density code, and the Residential Design Codes (R-Codes) set the standards for housing. A house that meets every deemed-to-comply standard often needs only a building permit.

Sources

Last reviewed: November 2026. Rules can change, so verify with your council before starting work.

General guidance only. Not planning advice. Confirm the zone and overlays with the council before relying on them.

Talk to a town planner in Western Australia

This page covers the general rules. A qualified town planner can tell you what applies to your block, including the zone, overlays and approval path, before you spend money on drawings.

  • Qualified, practising town planners
  • Advice specific to your property
  • Free, with no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

Your details and property information go to an independent town planner we work with, who will contact you about this enquiry. See our Privacy Policy.