How to check zoning in Victoria

Type the address below. You get the zone, the overlays and the lot in a few seconds, free, with no account.

The steps

  1. Type the street address

    Enter the number, street and suburb in the box above. It is free and needs no account.

  2. Read the zone

    The zone is at the top of the result, with the planning scheme it comes from. On a lot that sits across two zones, both are shown with the share of the lot each covers.

  3. Read the overlays

    Each overlay says one of three things: it affects the lot, it does not, or it was not checked. “Not checked” means no map was available to ask, which is different from a clear answer.

  4. See what the zone allows

    The zone’s land use table lists what needs no approval, what needs approval and what is prohibited. The result shows it where ZoneScout holds it.

  5. Confirm before you spend money

    A map result is a guide. Before you buy or build, confirm the zone and overlays with the council, or ask it for the formal planning certificate or written advice it issues for a property.

What the result shows in Victoria

  • The zone and its schedule (General Residential Zone, Schedule 1, for example).
  • Planning overlays, including heritage, bushfire and flooding.
  • Development applications nearby, where the register publishes them.
  • Lot size, street frontage, slope and easements.

Prefer a map?

The Victoria zoning map shows every lot coloured by zone, council by council. Click a lot to see its zone, size and overlays. The map is a dated copy; the address search asks the government’s data at the time you search.

The official source

The Planning and Environment Act 1987 sets up the system. Every council's planning scheme is built from the Victoria Planning Provisions, so zones and overlays work the same way across the state, with local schedules adding detail. Houses and townhouses are assessed against the residential standards in clauses 54 and 55. Building work is regulated separately under the Building Act 1993.

The government’s own map is VicPlan ↗. Planning information for the state is at Planning Victoria ↗.

Frequently asked questions

Is it free to check zoning in Victoria?

Yes. ZoneScout’s address search is free and needs no account. The government’s own planning map is free too.

Is the zone ZoneScout shows the official one?

It is read from the government’s published planning data. The formal record is the planning scheme itself and the certificate the council issues for a property, so confirm with the council before relying on it.

Can I check zoning without an address?

Yes. Open the Victoria zoning map and click any lot to see its zone.

What do I do after I know the zone?

Look at what the zone allows, then at the rules for your project. In Victoria, your council's planning scheme sets the zone and any overlays, and decides whether a project needs a planning permit. Building work usually needs a building permit as well, from a registered building surveyor.

Sources

Last reviewed: November 2026. Rules can change, so verify with your council before starting work.

General guidance only. Not planning advice. Confirm the zone and overlays with the council before relying on them.

Talk to a town planner in Victoria

This page covers the general rules. A qualified town planner can tell you what applies to your block, including the zone, overlays and approval path, before you spend money on drawings.

  • Qualified, practising town planners
  • Advice specific to your property
  • Free, with no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

Your details and property information go to an independent town planner we work with, who will contact you about this enquiry. See our Privacy Policy.