How to check zoning in Tasmania

Type the address below. You get the zone, the overlays and the lot in a few seconds, free, with no account.

The steps

  1. Type the street address

    Enter the number, street and suburb in the box above. It is free and needs no account.

  2. Read the zone

    The zone is at the top of the result, with the planning scheme it comes from. On a lot that sits across two zones, both are shown with the share of the lot each covers.

  3. Read the overlays

    Each overlay says one of three things: it affects the lot, it does not, or it was not checked. “Not checked” means no map was available to ask, which is different from a clear answer.

  4. See what the zone allows

    The zone’s land use table lists what needs no approval, what needs approval and what is prohibited. The result shows it where ZoneScout holds it.

  5. Confirm before you spend money

    A map result is a guide. Before you buy or build, confirm the zone and overlays with the council, or ask it for the formal planning certificate or written advice it issues for a property.

What the result shows in Tasmania

  • The zone, by name, from the Tasmanian Planning Scheme (or Kingborough’s interim scheme).
  • The codes mapped over the land, such as bushfire, landslip, coastal inundation and flood.
  • Lot size, street frontage, slope and easements.

Prefer a map?

The Tasmania zoning map shows every lot coloured by zone, council by council. Click a lot to see its zone, size and overlays. The map is a dated copy; the address search asks the government’s data at the time you search.

The official source

The Land Use Planning and Approvals Act 1993 sets up the system. The Tasmanian Planning Scheme combines State Planning Provisions, the same everywhere, with each council's Local Provisions Schedule. It applies in every council except Kingborough, which still uses its interim scheme while its schedule is assessed. Building work is regulated under the Building Act 2016, which grades work from low-risk to permit work.

The government’s own map is the LIST ↗. Planning information for the state is at Planning in Tasmania ↗.

Frequently asked questions

Is it free to check zoning in Tasmania?

Yes. ZoneScout’s address search is free and needs no account. The government’s own planning map is free too.

Is the zone ZoneScout shows the official one?

It is read from the government’s published planning data. The formal record is the planning scheme itself and the certificate the council issues for a property, so confirm with the council before relying on it.

Can I check zoning without an address?

Yes. Open the Tasmania zoning map and click any lot to see its zone.

What do I do after I know the zone?

Look at what the zone allows, then at the rules for your project. In Tasmania, the Tasmanian Planning Scheme sets the zones and codes, with each council's local provisions. Whether a project needs a planning permit depends on whether it meets the scheme's acceptable solutions; building work is graded separately by risk.

Sources

Last reviewed: November 2026. Rules can change, so verify with your council before starting work.

General guidance only. Not planning advice. Confirm the zone and overlays with the council before relying on them.

Talk to a town planner in Tasmania

This page covers the general rules. A qualified town planner can tell you what applies to your block, including the zone, overlays and approval path, before you spend money on drawings.

  • Qualified, practising town planners
  • Advice specific to your property
  • Free, with no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

Your details and property information go to an independent town planner we work with, who will contact you about this enquiry. See our Privacy Policy.