How to check zoning in South Australia

Type the address below. You get the zone, the overlays and the lot in a few seconds, free, with no account.

The steps

  1. Type the street address

    Enter the number, street and suburb in the box above. It is free and needs no account.

  2. Read the zone

    The zone is at the top of the result, with the planning scheme it comes from. On a lot that sits across two zones, both are shown with the share of the lot each covers.

  3. Read the overlays

    Each overlay says one of three things: it affects the lot, it does not, or it was not checked. “Not checked” means no map was available to ask, which is different from a clear answer.

  4. See what the zone allows

    The zone’s land use table lists what needs no approval, what needs approval and what is prohibited. The result shows it where ZoneScout holds it.

  5. Confirm before you spend money

    A map result is a guide. Before you buy or build, confirm the zone and overlays with the council, or ask it for the formal planning certificate or written advice it issues for a property.

What the result shows in South Australia

  • The zone from the Planning and Design Code, with the date of the copy it was read from.
  • The site area, frontage and height figures the Code maps for that land, where it maps them.
  • Bushfire, flood and heritage overlays.
  • Lot size, street frontage and slope.

Prefer a map?

The South Australia zoning map shows every lot coloured by zone, council by council. Click a lot to see its zone, size and overlays. The map is a dated copy; the address search asks the government’s data at the time you search.

The official source

The Planning, Development and Infrastructure Act 2016 sets up the system, and the Planning and Design Code, in place statewide since March 2021, holds the zones, overlays and policies for every property. Applications are lodged and tracked on PlanSA, and decided by an assessment manager, an assessment panel or an accredited professional, depending on the pathway.

The government’s own map is the South Australian Property and Planning Atlas ↗. Planning information for the state is at PlanSA ↗.

Frequently asked questions

Is it free to check zoning in South Australia?

Yes. ZoneScout’s address search is free and needs no account. The government’s own planning map is free too.

Is the zone ZoneScout shows the official one?

It is read from the government’s published planning data, from a dated copy. The formal record is the planning scheme itself and the certificate the council issues for a property, so confirm with the council before relying on it.

Can I check zoning without an address?

Yes. Open the South Australia zoning map and click any lot to see its zone.

What do I do after I know the zone?

Look at what the zone allows, then at the rules for your project. South Australia has one Planning and Design Code for the whole state: it sets the zones, subzones and overlays everywhere, and every application goes through the PlanSA portal. A development approval is made up of planning consent and building consent.

Sources

Last reviewed: November 2026. Rules can change, so verify with your council before starting work.

General guidance only. Not planning advice. Confirm the zone and overlays with the council before relying on them.

Talk to a town planner in South Australia

This page covers the general rules. A qualified town planner can tell you what applies to your block, including the zone, overlays and approval path, before you spend money on drawings.

  • Qualified, practising town planners
  • Advice specific to your property
  • Free, with no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

Your details and property information go to an independent town planner we work with, who will contact you about this enquiry. See our Privacy Policy.