How to check zoning in Australian Capital Territory
Type the address below. You get the zone, the overlays and the lot in a few seconds, free, with no account.
The steps
Type the street address
Enter the number, street and suburb in the box above. It is free and needs no account.
Read the zone
The zone is at the top of the result, with the planning scheme it comes from. On a lot that sits across two zones, both are shown with the share of the lot each covers.
Read the overlays
Each overlay says one of three things: it affects the lot, it does not, or it was not checked. “Not checked” means no map was available to ask, which is different from a clear answer.
See what the zone allows
The zone’s land use table lists what needs no approval, what needs approval and what is prohibited. The result shows it where ZoneScout holds it.
Confirm before you spend money
A map result is a guide. Before you buy or build, confirm the zone and overlays with the council, or ask it for the formal planning certificate or written advice it issues for a property.
What the result shows in Australian Capital Territory
- The zone from the Territory Plan (RZ1 Suburban, for example).
- Heritage and bushfire mapping.
- Lot size, street frontage and easements.
Prefer a map?
The Australian Capital Territory zoning map shows every lot coloured by zone, council by council. Click a lot to see its zone, size and overlays. The map is a dated copy; the address search asks the government’s data at the time you search.
The official source
The Planning Act 2023 replaced the ACT's previous planning system in November 2023, along with a new Territory Plan. Applications go to the Territory Planning Authority. ACT land is leasehold, so adding dwellings or unit titling usually also needs a variation to the Crown lease.
The government’s own map is ACT Planning ↗.
After you know the zone
- What each zone allows in Australian Capital Territory
- Building and planning rules in Australian Capital Territory, by project
- Talk to a planner if the answer is not clear cut
Frequently asked questions
Is it free to check zoning in Australian Capital Territory?
Yes. ZoneScout’s address search is free and needs no account. The government’s own planning map is free too.
Is the zone ZoneScout shows the official one?
It is read from the government’s published planning data. The formal record is the planning scheme itself and the certificate the council issues for a property, so confirm with the council before relying on it.
Can I check zoning without an address?
Yes. Open the Australian Capital Territory zoning map and click any lot to see its zone.
What do I do after I know the zone?
Look at what the zone allows, then at the rules for your project. In the ACT, the Territory Plan sets the zones and policies for every block, and the Planning Act 2023 sets how applications are assessed. Some small works are exempt; most other development needs a development application.
Sources
General guidance only. Not planning advice. Confirm the zone and overlays with the council before relying on them.
Talk to a town planner in Australian Capital Territory
This page covers the general rules. A qualified town planner can tell you what applies to your block, including the zone, overlays and approval path, before you spend money on drawings.
- Qualified, practising town planners
- Advice specific to your property
- Free, with no obligation