Town of Mosman Park zoning map

Every one of the 3,708 parcels in Town of Mosman Park, Western Australia — mapped by zone, lot size, and bushfire, flood and heritage constraints. Free, no sign-up, built from Western Australia government spatial data.

Open Town of Mosman Park on the map

Pan the parcel map, filter by zone family and minimum lot size, and click any lot for its zone, measured area and mapped constraints.

Open the Town of Mosman Park map →

Or jump straight to: residential land · granny-flat sized lots (450 m²+) · subdivision sized lots (800 m²+)

Zones in Town of Mosman Park

Residential covers the most land by parcel count — 3,001 parcels, about 81% of the council. These are the 8 most common zones across all 3,708 parcels.

ZoneParcelsShare
Residential3,00180.9%
Local road2717.3%
Commercial1002.7%
Mixed use782.1%
Regional open space651.8%
Public open space521.4%
Local distributor road300.8%
Primary regional roads240.6%

59 parcels carry more than one zone. On a split lot the controls differ across the block, so a single zone label for the property can be misleading — the map shows each part and its area.

Constraints mapped in Town of Mosman Park

Overlays decide what you can actually build, and they are mapped per property rather than per council. These totals show how much of Town of Mosman Park carries each one — and, just as importantly, how much of it nobody has assessed.

Bushfire

15.99%

593 parcels (15.99%) are inside a mapped bushfire overlay. The rest sit outside it, so the bushfire planning controls do not apply there — not that the land cannot burn.

Flood

Not mapped

No flood mapping is published for Town of Mosman Park in the data behind our map, so we cannot say either way. That is not the same as the land being clear.

Heritage

Not mapped

No heritage mapping is published for Town of Mosman Park in the data behind our map, so we cannot say either way. That is not the same as the land being clear.

Overlays can change your eligibility

Heritage, flood and bushfire controls on your specific lot can remove the fast-track and require a full application — even when the general rules say you're fine.

HeritageFloodBushfire
Check your address for overlays →

Building rules in Western Australia

Zoning tells you what the land is for. These guides cover what you can actually build on it under Western Australia rules.

Frequently asked questions

How do I find the zoning of a specific property in Town of Mosman Park?

Enter the address in ZoneScout's address search. It returns the zone, the overlays mapped on that lot and the lot boundary, queried live from the Western Australia planning services rather than from this page's snapshot.

What are the most common zones in Town of Mosman Park?

Residential is the largest by parcel count — 3,001 of 3,708 parcels, about 81%. The full breakdown of the 8 most common zones is in the table above.

How many properties are in Town of Mosman Park?

Our map holds 3,708 parcels for Town of Mosman Park, covering about 4.2 km². That is what our map holds for this council. It is drawn from the state cadastre, but some parcel types are deliberately left out — strata unit lots stacked on their base parcel, and easements — so it is not the same as a count of titles.

Is this zoning information official?

It is built from the Western Australia government's own published spatial data, but it is a snapshot taken on 2026-09-06 and is not a substitute for a planning certificate. For a decision that matters, check the address live and confirm with Town of Mosman Park council.

About this data

  • Parcel boundaries, zoning and overlays: Western Australia government spatial services
  • Snapshot taken: 2026-09-06 — check any address live
  • 3,708 parcels across 4.2 km²
This page is a snapshot for browsing. For a decision that matters, check the individual address — planning data changes and only the live services are current.

General information only, not planning advice. Zoning and overlay mapping is published by Western Australia government agencies and Town of Mosman Park council and can change; confirm with the council or a qualified planner before relying on it. Snapshot: 2026-09-06.

Talk to a town planner in Town of Mosman Park

This page covers the general rules. A qualified town planner can tell you what applies to your actual block — the zone, the overlays and the approval path — before you spend money on drawings.

  • Qualified, practising town planners
  • Advice on your property, not a generic rule
  • No cost, no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

By submitting you agree to be contacted about your enquiry. We never sell your data. See our Privacy Policy.