Shire of Broomehill-Tambellup zoning map

Every one of the 5,254 parcels in Shire of Broomehill-Tambellup, Western Australia — mapped by zone, lot size, and bushfire, flood and heritage constraints. Free, no sign-up, built from Western Australia government spatial data.

Open Shire of Broomehill-Tambellup on the map

Pan the parcel map, filter by zone family and minimum lot size, and click any lot for its zone, measured area and mapped constraints.

Open the Shire of Broomehill-Tambellup map →

Or jump straight to: residential land · granny-flat sized lots (450 m²+) · subdivision sized lots (800 m²+)

Zones in Shire of Broomehill-Tambellup

Farming covers the most land by parcel count — 3,171 parcels, about 60% of the council. These are the 8 most common zones across all 5,254 parcels.

ZoneParcelsShare
Farming3,17160.4%
Residential60311.5%
Rural residential1272.4%
Recreation and open space1112.1%
Parks and recreation1102.1%
Town centre1042.0%
Road951.8%
Railway891.7%

25 parcels carry more than one zone. On a split lot the controls differ across the block, so a single zone label for the property can be misleading — the map shows each part and its area.

662 parcels (12.6%) have no zone mapped in the published data — typically roads, reserves and Crown land. The shares above are of all 5,254 parcels, so they do not sum to 100%.

Constraints mapped in Shire of Broomehill-Tambellup

Overlays decide what you can actually build, and they are mapped per property rather than per council. These totals show how much of Shire of Broomehill-Tambellup carries each one — and, just as importantly, how much of it nobody has assessed.

Bushfire

93.34%

4,904 parcels (93.34%) are inside a mapped bushfire overlay. The rest sit outside it, so the bushfire planning controls do not apply there — not that the land cannot burn.

Flood

Not mapped

No flood mapping is published for Shire of Broomehill-Tambellup in the data behind our map, so we cannot say either way. That is not the same as the land being clear.

Heritage

Not mapped

No heritage mapping is published for Shire of Broomehill-Tambellup in the data behind our map, so we cannot say either way. That is not the same as the land being clear.

Overlays can change your eligibility

Heritage, flood and bushfire controls on your specific lot can remove the fast-track and require a full application — even when the general rules say you're fine.

HeritageFloodBushfire
Check your address for overlays →

Building rules in Western Australia

Zoning tells you what the land is for. These guides cover what you can actually build on it under Western Australia rules.

Frequently asked questions

How do I find the zoning of a specific property in Shire of Broomehill-Tambellup?

Enter the address in ZoneScout's address search. It returns the zone, the overlays mapped on that lot and the lot boundary, queried live from the Western Australia planning services rather than from this page's snapshot.

What are the most common zones in Shire of Broomehill-Tambellup?

Farming is the largest by parcel count — 3,171 of 5,254 parcels, about 60%. The full breakdown of the 8 most common zones is in the table above.

How many properties are in Shire of Broomehill-Tambellup?

Our map holds 5,254 parcels for Shire of Broomehill-Tambellup, covering about 2,590 km². That is what our map holds for this council. It is drawn from the state cadastre, but some parcel types are deliberately left out — strata unit lots stacked on their base parcel, and easements — so it is not the same as a count of titles.

Is this zoning information official?

It is built from the Western Australia government's own published spatial data, but it is a snapshot taken on 2026-09-06 and is not a substitute for a planning certificate. For a decision that matters, check the address live and confirm with Shire of Broomehill-Tambellup council.

About this data

  • Parcel boundaries, zoning and overlays: Western Australia government spatial services
  • Snapshot taken: 2026-09-06 — check any address live
  • 5,254 parcels across 2,590 km²
This page is a snapshot for browsing. For a decision that matters, check the individual address — planning data changes and only the live services are current.

General information only, not planning advice. Zoning and overlay mapping is published by Western Australia government agencies and Shire of Broomehill-Tambellup council and can change; confirm with the council or a qualified planner before relying on it. Snapshot: 2026-09-06.

Talk to a town planner in Shire of Broomehill-Tambellup

This page covers the general rules. A qualified town planner can tell you what applies to your actual block — the zone, the overlays and the approval path — before you spend money on drawings.

  • Qualified, practising town planners
  • Advice on your property, not a generic rule
  • No cost, no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

By submitting you agree to be contacted about your enquiry. We never sell your data. See our Privacy Policy.