Mid Murray Council zoning map

Every one of the 15,855 parcels in Mid Murray Council, South Australia — mapped by zone, lot size, and bushfire, flood and heritage constraints. Free, no sign-up, built from South Australia government spatial data.

Open Mid Murray Council on the map

Pan the parcel map, filter by zone family and minimum lot size, and click any lot for its zone, measured area and mapped constraints.

Open the Mid Murray Council map →

Or jump straight to: residential land · granny-flat sized lots (450 m²+) · subdivision sized lots (800 m²+)

Zones in Mid Murray Council

Rural covers the most land by parcel count — 7,002 parcels, about 44% of the council. These are the 8 most common zones across all 15,855 parcels.

ZoneParcelsShare
Rural7,00244.2%
Township1,4449.1%
Rural Shack Settlement1,3518.5%
Conservation1,2638.0%
Rural Settlement9996.3%
Suburban Neighbourhood9225.8%
Rural Living9025.7%
Established Neighbourhood4082.6%

992 parcels carry more than one zone. On a split lot the controls differ across the block, so a single zone label for the property can be misleading — the map shows each part and its area.

Constraints mapped in Mid Murray Council

Overlays decide what you can actually build, and they are mapped per property rather than per council. These totals show how much of Mid Murray Council carries each one — and, just as importantly, how much of it nobody has assessed.

Bushfire

98.91%

15,682 parcels (98.91%) are inside a mapped bushfire overlay. The rest sit outside it, so the bushfire planning controls do not apply there — not that the land cannot burn.

Flood

100%

15,855 parcels (100%) are inside a mapped flood overlay. The rest sit outside it, so the flood planning controls do not apply there — not that the land cannot flood.

Heritage

2.79%

442 parcels (2.79%) are inside a mapped heritage overlay. The rest sit outside it, so the heritage planning controls do not apply there — not that a property here could never be listed in future.

Overlays can change your eligibility

Heritage, flood and bushfire controls on your specific lot can remove the fast-track and require a full application — even when the general rules say you're fine.

HeritageFloodBushfire
Check your address for overlays →

Building rules in South Australia

Zoning tells you what the land is for. These guides cover what you can actually build on it under South Australia rules.

Frequently asked questions

How do I find the zoning of a specific property in Mid Murray Council?

Enter the address in ZoneScout's address search. It returns the zone, the overlays mapped on that lot and the lot boundary, queried live from the South Australia planning services rather than from this page's snapshot.

What are the most common zones in Mid Murray Council?

Rural is the largest by parcel count — 7,002 of 15,855 parcels, about 44%. The full breakdown of the 8 most common zones is in the table above.

How many properties are in Mid Murray Council?

Our map holds 15,855 parcels for Mid Murray Council, covering about 6,079 km². That is what our map holds for this council. It is drawn from the state cadastre, but some parcel types are deliberately left out — strata unit lots stacked on their base parcel, and easements — so it is not the same as a count of titles.

Is this zoning information official?

It is built from the South Australia government's own published spatial data, but it is a snapshot taken on 2026-08-12 and is not a substitute for a planning certificate. For a decision that matters, check the address live and confirm with Mid Murray Council council.

About this data

  • Parcel boundaries, zoning and overlays: South Australia government spatial services
  • Snapshot taken: 2026-08-12 — check any address live
  • 15,855 parcels across 6,079 km²
This page is a snapshot for browsing. For a decision that matters, check the individual address — planning data changes and only the live services are current.

General information only, not planning advice. Zoning and overlay mapping is published by South Australia government agencies and Mid Murray Council council and can change; confirm with the council or a qualified planner before relying on it. Snapshot: 2026-08-12.

Talk to a town planner in Mid Murray Council

This page covers the general rules. A qualified town planner can tell you what applies to your actual block — the zone, the overlays and the approval path — before you spend money on drawings.

  • Qualified, practising town planners
  • Advice on your property, not a generic rule
  • No cost, no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

By submitting you agree to be contacted about your enquiry. We never sell your data. See our Privacy Policy.