Gladstone Regional zoning map
Every one of the 35,600 parcels in Gladstone Regional, Queensland — mapped by zone, lot size, and bushfire, flood and heritage constraints. Free, no sign-up, built from Queensland government spatial data.
Open Gladstone Regional on the map
Pan the parcel map, filter by zone family and minimum lot size, and click any lot for its zone, measured area and mapped constraints.
Open the Gladstone Regional map →
Or jump straight to: residential land · granny-flat sized lots (450 m²+) · subdivision sized lots (800 m²+)
Zones in Gladstone Regional
Low Density Residential covers the most land by parcel count — 16,347 parcels, about 46% of the council. These are the 8 most common zones across all 35,600 parcels.
| Zone | Parcels | Share |
|---|---|---|
| Low Density Residential | 16,347 | 45.9% |
| Rural | 7,418 | 20.8% |
| Rural Residential | 2,789 | 7.8% |
| Special Purpose | 1,614 | 4.5% |
| Medium Density Residential | 1,354 | 3.8% |
| Township | 1,342 | 3.8% |
| Low-medium Density Residential | 1,176 | 3.3% |
| Open Space | 697 | 2.0% |
633 parcels carry more than one zone. On a split lot the controls differ across the block, so a single zone label for the property can be misleading — the map shows each part and its area.
44 parcels (0.1%) sit in an area where the council does not publish queryable zoning, so no zone is shown for them on the map. That is a gap in what is published, not a statement about the land.
Constraints mapped in Gladstone Regional
Overlays decide what you can actually build, and they are mapped per property rather than per council. These totals show how much of Gladstone Regional carries each one — and, just as importantly, how much of it nobody has assessed.
Bushfire
54.5%
19,403 parcels (54.5%) are inside a mapped bushfire overlay. The rest sit outside it, so the bushfire planning controls do not apply there — not that the land cannot burn.
Flood
36.32%
12,931 parcels (36.32%) are inside mapped flood areas. 63.68% of Gladstone Regional has no flood mapping at all — those parcels are unassessed, not cleared.
Heritage
0.24%
85 parcels (0.24%) are inside a mapped heritage overlay. The rest sit outside it, so the heritage planning controls do not apply there — not that a property here could never be listed in future.
Heritage, flood and bushfire controls on your specific lot can remove the fast-track and require a full application — even when the general rules say you're fine.
Building rules in Queensland
Zoning tells you what the land is for. These guides cover what you can actually build on it under Queensland rules.
Frequently asked questions
How do I find the zoning of a specific property in Gladstone Regional?
Enter the address in ZoneScout's address search. It returns the zone, the overlays mapped on that lot and the lot boundary, queried live from the Queensland planning services rather than from this page's snapshot.
What are the most common zones in Gladstone Regional?
Low Density Residential is the largest by parcel count — 16,347 of 35,600 parcels, about 46%. The full breakdown of the 8 most common zones is in the table above.
How many properties are in Gladstone Regional?
Our map holds 35,600 parcels for Gladstone Regional, covering about 10,452 km². That is what our map holds for this council. It is drawn from the state cadastre, but some parcel types are deliberately left out — strata unit lots stacked on their base parcel, and easements — so it is not the same as a count of titles.
Is this zoning information official?
It is built from the Queensland government's own published spatial data, but it is a snapshot taken on 2026-08-11 and is not a substitute for a planning certificate. For a decision that matters, check the address live and confirm with Gladstone Regional council.
About this data
- Parcel boundaries, zoning and overlays: Queensland government spatial services
- Snapshot taken: 2026-08-11 — check any address live
- 35,600 parcels across 10,452 km²
General information only, not planning advice. Zoning and overlay mapping is published by Queensland government agencies and Gladstone Regional council and can change; confirm with the council or a qualified planner before relying on it. Snapshot: 2026-08-11.
Talk to a town planner in Gladstone Regional
This page covers the general rules. A qualified town planner can tell you what applies to your actual block — the zone, the overlays and the approval path — before you spend money on drawings.
- Qualified, practising town planners
- Advice on your property, not a generic rule
- No cost, no obligation