Willoughby zoning map

Every one of the 18,548 parcels in Willoughby, New South Wales, mapped by zone, lot size, and bushfire, flood and heritage constraints. Free, no sign-up, built from New South Wales government spatial data.

Get the zone, overlays and lot size for one address, read live from the New South Wales planning services.

Open Willoughby on the map

Pan the parcel map, filter by zone family and minimum lot size, and click any lot for its zone, measured area and mapped constraints.

Open the Willoughby map →

Or jump straight to: residential land · granny-flat sized lots (450 m²+) · subdivision sized lots (800 m²+)

Zones in Willoughby

Low Density Residential covers the most land by parcel count: 11,848 parcels, about 64% of the council. These are the 8 most common zones across all 18,548 parcels.

ZoneParcelsShare
Low Density Residential11,84863.9%
Environmental Living2,85315.4%
Medium Density Residential1,2576.8%
General Industrial4922.7%
Environmental Conservation4462.4%
Public Recreation3622.0%
Local Centre3481.9%
Commercial Centre2411.3%

121 parcels carry more than one zone. On a split lot the controls differ across the block, so a single zone label for the property can be misleading. The map shows each part and its area.

Constraints mapped in Willoughby

Overlays decide what you can actually build, and they are mapped per property rather than per council. These totals show how much of Willoughby each overlay covers, and how much has never been mapped.

Bushfire

16.64%

3,087 parcels (16.64%) are inside a mapped bushfire overlay. The rest of the council has been mapped and sits outside it, so bushfire planning controls don't apply there.

Flood

0.06%

11 parcels (0.06%) are inside mapped flood areas. The other 99.94% of Willoughby has no flood mapping, so we can't say whether those parcels are affected.

Heritage

24.06%

4,462 parcels (24.06%) are inside a mapped heritage overlay. The rest of the council has been mapped and sits outside it, so heritage planning controls don't apply there.

Overlays can change your eligibility

Heritage, flood and bushfire controls on your specific lot can remove the fast-track and require a full application, even when the general rules say you're fine.

HeritageFloodBushfire
Check your address for overlays →

Building rules in New South Wales

Zoning tells you what the land is for. These guides cover what you can actually build on it under New South Wales rules.

Frequently asked questions

How do I find the zoning of a specific property in Willoughby?

Enter the address in ZoneScout's address search. It returns the zone, the overlays mapped on that lot and the lot boundary, queried live from the New South Wales planning services when you search.

What are the most common zones in Willoughby?

Low Density Residential is the largest by parcel count: 11,848 of 18,548 parcels, about 64%. The full breakdown of the 8 most common zones is in the table above.

How many properties are in Willoughby?

Our map holds 18,548 parcels for Willoughby, covering about 18 km². That is what our map holds for this council. It is drawn from the state cadastre, but some parcel types are deliberately left out — strata unit lots stacked on their base parcel, and easements — so it is not the same as a count of titles.

Is this zoning information official?

It is built from the New South Wales government's own published spatial data, but it is a snapshot taken on 2026-11-08 and is not a substitute for a planning certificate. For a decision that matters, check the address live and confirm with Willoughby council.

About this data

  • Parcel boundaries, zoning and overlays: New South Wales government spatial services
  • Snapshot taken: 2026-11-08. Check any address live
  • 18,548 parcels across 18 km²
This page is a snapshot for browsing. For a decision that matters, check the individual address. Planning data changes, and only the live services are current.

General information only, not planning advice. Zoning and overlay mapping is published by New South Wales government agencies and Willoughby council and can change; confirm with the council or a qualified planner before relying on it. Snapshot: 2026-11-08.

Talk to a town planner in Willoughby

This page covers the general rules. A qualified town planner can tell you what applies to your block, including the zone, overlays and approval path, before you spend money on drawings.

  • Qualified, practising town planners
  • Advice specific to your property
  • Free, with no obligation

Free planning consultation

A qualified town planner will be in touch within 1 business day.

Your details and property information go to an independent town planner we work with, who will contact you about this enquiry. See our Privacy Policy.