Spence zoning map
Every one of the 1,011 parcels in Spence, Australian Capital Territory, mapped by zone, lot size, and bushfire, flood and heritage constraints. Free, no sign-up, built from Australian Capital Territory government spatial data.
Get the zone, overlays and lot size for one address, read live from the Australian Capital Territory planning services.
Open Spence on the map
Pan the parcel map, filter by zone family and minimum lot size, and click any lot for its zone, measured area and mapped constraints.
Or jump straight to: residential land · granny-flat sized lots (450 m²+) · subdivision sized lots (800 m²+)
Zones in Spence
Suburban covers the most land by parcel count: 823 parcels, about 81% of the suburb. These are the 8 most common zones across all 1,011 parcels.
| Zone | Parcels | Share |
|---|---|---|
| Suburban | 823 | 81.4% |
| Suburban Core | 141 | 13.9% |
| Urban Open Space | 29 | 2.9% |
| Local Centre | 7 | 0.7% |
| Hills, Ridges and Buffer Areas | 6 | 0.6% |
| Community Facilities | 2 | 0.2% |
| Services | 2 | 0.2% |
| Transport | 1 | 0.1% |
Constraints mapped in Spence
Overlays decide what you can actually build, and they are mapped per property rather than per suburb. These totals show how much of Spence each overlay covers, and how much has never been mapped.
Bushfire
20.47%
207 parcels (20.47%) are inside a mapped bushfire overlay. The rest of the suburb has been mapped and sits outside it, so bushfire planning controls don't apply there.
Flood
Not mapped
No flood mapping is published for Spence in the data behind our map, so we can't say whether any of it is affected.
Heritage
0%
No parcel in Spence is inside a mapped heritage overlay. The whole suburb has been mapped, so heritage planning controls don't apply anywhere here.
Heritage, flood and bushfire controls on your specific lot can remove the fast-track and require a full application, even when the general rules say you're fine.
Building rules in Australian Capital Territory
Zoning tells you what the land is for. These guides cover what you can actually build on it under Australian Capital Territory rules.
Frequently asked questions
How do I find the zoning of a specific property in Spence?
Enter the address in ZoneScout's address search. It returns the zone, the overlays mapped on that lot and the lot boundary, queried live from the Australian Capital Territory planning services when you search.
What are the most common zones in Spence?
Suburban is the largest by parcel count: 823 of 1,011 parcels, about 81%. The full breakdown of the 8 most common zones is in the table above.
How many properties are in Spence?
Our map holds 1,011 parcels for Spence, covering about 1.2 km². That is what our map holds for this suburb. It is drawn from the state cadastre, but some parcel types are deliberately left out — strata unit lots stacked on their base parcel, and easements — so it is not the same as a count of titles.
Is this zoning information official?
It is built from the Australian Capital Territory government's own published spatial data, but it is a snapshot taken on 2026-11-08 and is not a substitute for a planning certificate. For a decision that matters, check the address live and confirm with the ACT’s Territory Planning Authority.
About this data
- Parcel boundaries, zoning and overlays: Australian Capital Territory government spatial services
- Snapshot taken: 2026-11-08. Check any address live
- 1,011 parcels across 1.2 km²
General information only, not planning advice. Zoning and overlay mapping is published by Australian Capital Territory government agencies and can change; confirm with the ACT’s Territory Planning Authority or a qualified planner before relying on it. Snapshot: 2026-11-08.
Talk to a town planner in Spence
This page covers the general rules. A qualified town planner can tell you what applies to your block, including the zone, overlays and approval path, before you spend money on drawings.
- Qualified, practising town planners
- Advice specific to your property
- Free, with no obligation